First Section
-
01_Introduction (1:57)
-
02_Parts Needed (2:29)
-
03_How it Works (3:35)
-
04_Designing with Components (2:55)
-
05_Configure Z up (1:21)
-
06_Sketch Constraint Status (2:47)
-
07_Designing the Battery Component (2:20)
-
08_Sketch and Revolve (5:45)
-
09_Sketch on Top Surface (3:04)
-
10_Sketch on Side & Pipe Command (6:53)
-
11_Side Opening (3:26)
-
12_Bumpout (3:49)
-
13_Sketch and Revolve (4:29)
-
14_Bottom Bumpouts (4:04)
-
15_Top Sketch & Circular Pattern (7:29)
-
16_Section Analysis (4:12)
-
17_Sketch & Extrude (4:13)
-
18 Increase Radius (2:04)
-
19_Locking_key (2:43)
-
20_ On Off Indicators (5:34)
-
21_Slot (2:32)
-
22_Arrow Indicator to Bottom Component (2:56)
-
23_Top Fillet (3:25)
-
24_Extrusion Width (8:19)
-
25_Assemble All the Parts (1:55)
-
26_Congratulations (0:39)
0 comments