Autoplay
Autocomplete
Previous Lesson
Complete and Continue
Fusion 360 - Designing with Components
First Section
01_Introduction (1:57)
02_Parts Needed (2:29)
03_How it Works (3:35)
04_Designing with Components (2:55)
05_Configure Z up (1:21)
06_Sketch Constraint Status (2:47)
07_Designing the Battery Component (2:20)
08_Sketch and Revolve (5:45)
09_Sketch on Top Surface (3:04)
10_Sketch on Side & Pipe Command (6:53)
11_Side Opening (3:26)
12_Bumpout (3:49)
13_Sketch and Revolve (4:29)
14_Bottom Bumpouts (4:04)
15_Top Sketch & Circular Pattern (7:29)
16_Section Analysis (4:12)
17_Sketch & Extrude (4:13)
18 Increase Radius (2:04)
19_Locking_key (2:43)
20_ On Off Indicators (5:34)
21_Slot (2:32)
22_Arrow Indicator to Bottom Component (2:56)
23_Top Fillet (3:25)
24_Extrusion Width (8:19)
25_Assemble All the Parts (1:55)
26_Congratulations (0:39)
Teach online with
26_Congratulations
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock